Terminal Server fails to Logoff after closing startup program

[OweH]

My Terminal Server sessions fail to logoff when closing the program that has been automaticly started when loggin on.
The program is beiing closed correctly but the session is still active only showing a blank screen. Disconnecting can be made by closing the session windows but then I cant log on anymore with the same user.

When no program is started and using the Logoff choice on the Startmeny the session is beeing logged off correctly.

Greatful for ideas!

 

[devastator]

What I did was the following. (since some employees couldn't follow instructions)

Go into Terminal Services Configuration, right click on RDP-TCP under Connections, go into properties, goto sessions, and there you can set rules for end a disconnected session.


Drew

 

[OweH]

Thanks for your advice. I am aware of that setting but thats not the issue.

After closing the application the client window stays up with a blank screen only.

 

[Theoneandonly]

Can you tell what progam it is ?

 

[OweH]

Doesent matter what program i startup. Same result with Notepad.exe for an example.

 

[OweH]

Found out that it was the Drive Share, drmapsrv.exe that was the problem. Removing registry entries and .exe file for the addon solved the problem...

Drive Share:

http://www.tburke.net/info/reskittools/topics/drmapsrv.htm