Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

tcp connection failure

Status
Not open for further replies.

absi

MIS
Joined
Sep 2, 2000
Messages
67
Location
GB
hi all
i am facing a problem that after a user initiate
a report and leave his session inactive.
Infact user did nothing after initiating that
report.......just exactly after 1hr and 30 min
message appers" Tcp Connecion failure"
Is there any tcpip related setting which can solve
this problem???
Notice:No TMOUT setting
Absi
 
Dears.......
I have the same problem on AIX4.3.3
Is this a bug which require APAR from IBM
Advise me!!
James
 
You must work with tcp_keepidle option of no. To see it you type no -a | grep tcp_keep . The value is half of seconds : it means, in a simplified way, that inactive connection will be cut by this time.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top