I just upgraded our R1T1 to 6.1, and now the target lines aren't going to the right places-- the call comes in on the T1 channel 1, and then goes to the prime set for that channel, instead of the prime for the target line.
I'm not very familiar with the 6.1 (not at all), since I've just been working on the R1T1. The KSU is new, too, but the s/w had the same problem on the old KSU.
Thanks for any help, especially since I feel like this is a dumb question...
I'm not very familiar with the 6.1 (not at all), since I've just been working on the R1T1. The KSU is new, too, but the s/w had the same problem on the old KSU.
Thanks for any help, especially since I feel like this is a dumb question...
