Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tape library
- Thread starter razvannw
- Start date
- Thread starter
- #3
I am interested how other solves this problem, because I have license for autochanger with 128, and I have 129 slots.
I consider that is absurd to buy a license for 256 to use 129.In NW 7.2, I solve this problem by modifying resource file, but in NW 7.3 don’t work.
On the other hand, the next level o slot license for IBM is 287, so if I buy from Legato 256 I have the same problem
I consider that is absurd to buy a license for 256 to use 129.In NW 7.2, I solve this problem by modifying resource file, but in NW 7.3 don’t work.
On the other hand, the next level o slot license for IBM is 287, so if I buy from Legato 256 I have the same problem
- Thread starter
- #5
Let me explain my environment:
I have a tape library with 129 slots and 4 drives.
In the tape library software I can’t make a partition without a drive, and I don’t want to lose any drive.
Also, I try to remove some plastic and define another cleaning cartridge, but without any success.
There is no solution from hardware vendor.
I try to find someone with similar problem to see how they solved the problem with Legato licenses department.
I have a tape library with 129 slots and 4 drives.
In the tape library software I can’t make a partition without a drive, and I don’t want to lose any drive.
Also, I try to remove some plastic and define another cleaning cartridge, but without any success.
There is no solution from hardware vendor.
I try to find someone with similar problem to see how they solved the problem with Legato licenses department.
- Status
Similar threads
- Locked
- Question
- Locked
- Question