T1 with PRI Card replacement

[whender]

I have a customer with a MICS and two T1 Cards. One of the T1 cards is a PRI and the other is not in use. I do not have the PRI key code. If I switch the T1 cards will I need the codes and outside of the T1 parameters are there any programming considerations.

Thanks

 

[dibthree]

You will need the PRI enabler so that you can change the card type to PRI ISDN. You will need to set the protocal - Use NI2.

 

[hawks]

If the first one is already set up for PRI then the codes are in the system. You just need to change the programming of the other card.

 

[whender]

Thanks for the info.