Gloryhound
Technical User
When system boots it reports "settings changed or unworkable CPU" it then allows you to F1 or DEL. F1 works fine the computer boots and operates as normal. However if you Enter the BIOS and attempt to set the settings or even roll back to fail safe defaults. Upon Saving and exiting the system hangs and must be powered off.
Haven't run into too many CMOS problems before, attempted to clear the CMOS and also changed the battery. To no effect, the problem persists.
Mobo Abit
Model IS7-V
512mb Ram
Windows XP
Haven't run into too many CMOS problems before, attempted to clear the CMOS and also changed the battery. To no effect, the problem persists.
Mobo Abit
Model IS7-V
512mb Ram
Windows XP