Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SYS_PRINTER

Status
Not open for further replies.
GroundRatt

GroundRatt

IS-IT--Management
Apr 19, 2002
149
US
how do I set up a network printer to be the sys printer? i have a c-lan card and i use ASA for admin through the network...any help is appreciated...
 
Sort by date Sort by votes
1) Enter the IP address in the node-names ip form
2) Enter the node-name and subnet in the ip-interfaces form
3) Enter sys-prnt in the ip-services form use port 9100.
 
Upvote 0 Downvote
After setting up a sys prnt as described above, i get a warning on sys prnt. And ideas?
 
Upvote 0 Downvote
Can you print at all?
Make sure that the C-LAN can reach the Printer.
This can be done using &quot;ping ip-address <x.x.x.x>&quot;
Check if the printer has IP printing switched on, and whether that is on port 9100, HP usually is 9100.
This error is caused by the fact the switch does not have a link with the printer.


Rob
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top