Symantec Firewall cpu temperature alert

[KarsonKo]

I was wondering if I can setup an alert for the Symantec Firewall CPU temperature if it raise up to a certain temperature.

Our Firewall is SSG 5110.

a document for the cpu temperature is

http://service1.symantec.com/SUPPOR...88256d6a0069443b?OpenDocument&src=bar_sch_nam

Thank you.

 

[SefLogic]

Great question, By default the SGS will alert with a 516 Alert message if the CPU Temperature is to low/high. The normal range is between 0° to 80 so if the SGS goes above or below this temperature it will send an alert to the log file.

So if you want to receive a notification eg: email, page etc then all you have to do is setup a notification within the SRMC, I have added a link to a KB on the Symantec site that will help you setup a email notification.

http://service1.symantec.com/support/ent-gate.nsf/docid/2000091312371054

SefLogic

tips on fixing any problem in the world
1. Check google / google-groups
2. check the vendor support page
3. get a book on the topic