SX 200 Database Restore 2

[rschleigh]

I need help with a Database Restore on a Mitel SX200 El/ML.
Im using Procomm Plus 4.8 and every time i get to 4% of the restore it aborts!
What should my settings be in procomm? I never had this problem in the past.
Any help is appreciated.

 

[jsaad]

try hyperterm, comes with windows.

 

[nytalkin]

make sure you are using the Kermit option in Procomm.

NO GOOD DEED GOES UNPUNISHED!

 

[rschleigh]

Thanks jsaad
hyperterm worked how ever the system goes in to software decompression over and over again. It never completes the "boot".

nytalking, i have it in kermit but it wont work after 4% it abort the load. Strange I know
I was thinking last night i have never done a restore on this laptop. I am using a USB to serial adapter and have never done a restore wit one in the past. Any one else try using one during a restore?
Thanks for the input.

 

[kwbMitel]

I beleive you might have to change the Maximum Packet size for Kermit in Procomm.

Mine is set to 1024
Also recommend setting to 1 byte checksum


**********************************************
What's most important is that you realise ... There is no spoon.

 

[jonmyk]

I have used the usb to serial adapter with hyperterminal for restores and have yet to experience any problems.

"The only problem with common sense is that it's not that common