Swapping out IP403 with IP500 Lan/Wan question

[NYSTECH]

Currently the 403( 192.168.200.xxx) has 8 lan ports we are using one (The uplink) to connect to a router which is 192.168.200.XXX
We are using one of the other lan ports to connect to the manager PC ( 192.168.200.xxx)

Since the IP500 only has one Wan and One LAN port can I plug the router into WAN port and the PC into the LAN port and have them both on same subnet (192.168.200.XXX) or will I need to change some Ip addresses..

Sorry for the questions but, a little confused as to WAN and Lan Ports on IP500... and if I need to get a hub..

Any help is appreciated

ACS- IPOffice Implement

 

[tlpeter]

See it as two separate lan ports
They can not have the same range
But why not putting the pc with manager on a switch that is connected to the lan port
The router can be on the same switch

ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[NYSTECH]

Not enough ports on current switch... So, I was trying to avoid installing another switch..

ACS- IPOffice Implement

 

[mattKnight]

<gulp>

Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.