Dec 13, 2010 #1 JBRAM Programmer Aug 18, 2010 48 US What is the proper procedure for removing the nvram and compact flash from one MICS and putting it in another?
What is the proper procedure for removing the nvram and compact flash from one MICS and putting it in another?
Dec 13, 2010 Thread starter #2 JBRAM Programmer Aug 18, 2010 48 US Might I add...can you do this without causing a cold start, e.g. without losing programming? Upvote 0 Downvote
Dec 14, 2010 #3 luv2ski Vendor Sep 14, 2003 1,296 US believe you will need to do a back on old ksu and then restore on new. 6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week" Upvote 0 Downvote
believe you will need to do a back on old ksu and then restore on new. 6 months until ski season starts...sadly i must resign myself to the warmer weather"this will include a normal 8-5 work day, 5 days a week"