SV9100 demo license 2

[conxtel]

How does one enable the 60 day demo license on a SV9100 CP10?

I have tried it via PcPro 90-55, saved, logged out, logged back in a performed 2nd initialization, nothing.
Tried via WebPro, similar as above, nothing.
Tried via telephone and manually powered off system and restart and nothing.

What is the proper procedure for enabling it?

 

[belevedere]

Note, the 60 day license is a one time thing. If it was used once already, then it cannot be used again.

 

[OzzieGeorge]

You can repeatedly use the 10 day license though!

 

[conxtel]

Hasn't been used, can't figure out how to enable it, lol.

 

[OzzieGeorge]

Check in Command 10-52. If it is 0 then you are out of luck and it has been used! Maybe the installer turned it on and it didn't get turned off!

 

[OzzieGeorge]

Just a note, there is a way to reinstate it but I don't have the facts on it. Apparently you have to delete some files from the SD card and reboot the system and it thinks it is a new install so it reinstates the demo license.

 

[conxtel]

If the ten day one can be used repeatedly, how does one enable it? I am just trying to test the features of the ST500 app. Currently using MLC app on an iPhone but with the changes coming from Apple, the MLC is going to stop working without using a uSN application.

From what I have initially seen, the ST500 doesn't have as many features as the MLC app but according to NEC, MLC was intended to used on desktop applications and devices like the UT880, not cell phones. Not sure why, I have been using MLC personally for a couple years and I love it.

 

[belevedere]

90-37 : Set Temporary License, login through a telephone. Go to MB 90-37-01, input 10 (for 10 days). Then log out and reboot the system.