supress box when repeated

[ianholmes]

My XI report has a detail line which consists of 2 fields from an SP, and a box, which was drawn using the Insert function. I need to suppress this detail line if it is repeated. I can suppress each of the 2 fields OK, but not the box. If I right click on it, I can Format Box, but I can only Suppress, I cannot suppress when duplicated. I have also tried Section Expert, but it too does not allow Suppress when Duplicated.
Is there any other way to suppress such a line ?
Many thanks in advance.

 

[AndyMc]

ianholmes,

Check this link out from Ken Hamady - it might apply to what you are trying to do:

http://kenhamady.com/cru/archives/98

Andy

 

[lbass]

What criteria are you using to determine duplication? You should be able to suppress the entire section, including the box, based on a particular criterion, e.g.,

{table.ID} = Previous({table.ID})

-LB