Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

suggestions for increased bandwidth

Status
Not open for further replies.
ilpadrino

ilpadrino

MIS
Feb 14, 2001
416
US
I currently have a T1 connected to a 1600. Can anyone suggest ways to increase this bandwidth and also what hardware would be required. Can I add a second T1 for instance? Thanks.
 
Sort by date Sort by votes
How do you have the current T1 connected to the router? There are 1600 models that have a serial connection, and a WAN port. If you currently have a CSU/DSU card in the Wan port, you can add an external CSU/DSU to handle another T1. You can then balance traffic coming from your network between those interfaces, the additional cost would be that of a CSU/DSU device, and the monthly cost of the link.

-Travis.
 
Upvote 0 Downvote
It does not have WAN port. It has a seperate CSU/DSU attached to the serial connection. But I'm not opposed to replacing that router if necessary. Thanks.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
593
jarod_paris
jarod_paris
MontrealSoft
  • Locked
  • Question
Heated cabinets suggestions
Replies
2
Views
423
MontrealSoft
MontrealSoft
B
  • Locked
  • Question
Cisco IP phone 7841 8851 unable to forward all to external number
Replies
0
Views
380
badwolf1686
B
disk-us
  • Locked
  • Question
RTU licensing for a901
Replies
0
Views
248
disk-us
disk-us
Willi DB
  • Locked
  • Question
Polycom410 Forward an incoming call
Replies
0
Views
295
Willi DB
Willi DB

Part and Inventory Search

Sponsor

Back
Top