Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stranded vs Solid Cat5e cable 1
- Thread starter eanda10
- Start date
-
1
- #2
you should run solid cable from patch panel to workstation terminate at the workstation with a jack
from jack to the nic on the workstaion and from the patch panel to the switch use stranded patch cords I would sugest buying them premade
solid wire should be installed so that it wont be flexed once installed flexing can break down the connection
strande wire is used where the cable will be flexed.
stranded wire has more restance than solid as a result the distance you can run it is greatly reduced
from jack to the nic on the workstaion and from the patch panel to the switch use stranded patch cords I would sugest buying them premade
solid wire should be installed so that it wont be flexed once installed flexing can break down the connection
strande wire is used where the cable will be flexed.
stranded wire has more restance than solid as a result the distance you can run it is greatly reduced
- Thread starter
- #3
- Status