Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Stopping ANI from coming up on one line only.

Status
Not open for further replies.
Mactele2000

Mactele2000

MIS
Dec 16, 2003
17
US
I need to stop the ANI from coming up on one line only. We have and need ANI on all other lines, one 800 cannot have it. Is there a way for me to do this on the G3r? Any info would help.
 
Sort by date Sort by votes
I still have not been able to do this. If anybody has or knows somthing, please post it.
 
Upvote 0 Downvote
if you have pri,,, (And I am on cm 3.1)
but do a change incoming tru xx
enter the 4 digits being passed, and on per call cpn/bn put none...
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

DTechNation
  • Locked
  • Question
Display call is coming from a Coverage Answer Group on J179s
Replies
0
Views
289
DTechNation
DTechNation
JoaquinC
  • Locked
  • Question
AXP - ANI Routing
Replies
0
Views
287
JoaquinC
JoaquinC
Craft01
  • Question
CM: One-X Communicator cannot register to ESS when it goes active
Replies
6
Views
132
Sean655
S
Richard_Harrow
  • Locked
  • Question
DB and LIC error showing on One-X attendant after installation
Replies
0
Views
567
Richard_Harrow
Richard_Harrow
anthony123
  • Locked
  • Question
NO AUDIO on calls from Avaya IP Phone 9641G
Replies
5
Views
764
anthony123
anthony123

Part and Inventory Search

Sponsor

Back
Top