Status Station All

[Jsaunde7]

All,

Upgrading a VLan/Switch this weekend for one of your sites. Is there a way to get a status status of all extension we have. I've tried the list registered-ip stations command and also the list multimedia-ip unregistered. Here is the issue that I've tried and having an issue with. I brought the port down for 1 of the stations in that building but it still shows registration status of registered but shows phone administered type but connected phone type as n/a. I need to verify that all the phones reboot without actually having to go into the office and look at each phone. I would think that if I brought to port down on the switch the phone is connected to, it wouldn't show registered. If I could find a way to show all the connected phone types of N/A, this would help with saving a trip into the office...All help is appreciated.

 

[phoneguy55]

reset ip stations will force the phones to reboot.

 

[Jsaunde7]

when we bring down the ports on the switch and bring them back up, the phones are supposed to reboot, I'm needing to confirm if they all actually rebooted. we have extension in the the same range in 2 different locations so if it do a reset ip stations, how will I know it's rebooting phones in that actual location.

 

[montyzummer]

do a list reg reg for each network region before during and after

status socket before during after

look at the ip event log in the smi before etc ect

ACSS (UC/SBCE/SM/SME)

Not that they mean a thing anymore , get a brain dump pass the test crash the system.