Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Station to Station Call Logging

Status
Not open for further replies.
rhcasino

rhcasino

IS-IT--Management
Joined
Mar 6, 2008
Messages
8
Location
US
We use Cash Call Accounting software but it doesn't log station to station calls. I'm pretty sure the PBX supports that but its not setup to report that information. If anyone can lend some direction on this I would appreciate it. Thanks.
 
Sort by date Sort by votes
I do not believe the 2000 supports station to station SMDR, If this is a 2400 check service feature bits.
 
Upvote 0 Downvote
Correction if you have a software level 3600 or higher on a 2000 it looks like it is supported. CMD 1245 set up a group class and in DD04>XX12>1 for terminal 0 or XX13 for terminal 1 where XX is the class number assigned in 1245.
 
Upvote 0 Downvote
Your biggest problem with this is whether the software (cash call accounting) can handle the data if it is outputted (does that word really exist?) Time to contact the third party supplier I think.
 
Upvote 0 Downvote
From what the Software company says, it will. How do I check the software version of the system? We've only had it for about 3 months so I would think it has the most current version but i want to double check. The program Cash Call has a service called Cash Log. This monitors and records all data from the PBX via SMDR. When I make outside calls I see this information show up but when I make station to station calls, nothing happens. I will double check with the software company and find out what changes need to be made to their software to support station to station calling. I just wanted to find out where it was setup in the PBX so i could check and verify its configured. Thanks for your patience and help guys.
 
Upvote 0 Downvote
What PBX do you have? NEAX 2000? NEAX 2400, NEC IPKII?
 
Upvote 0 Downvote
Station to station SMDR was released with 3600 series software (R11) back in Dec 2005 so If recently purchased I'd say it was safe to say your system supports this feature.
 
Upvote 0 Downvote
Yes we purchased the system in Q4 of 2007. Could someone post the feature name or starting CMD so I can look it up in the Feature/CMD manuals? Thanks again to all that have helped.
 
Upvote 0 Downvote
In the Feature Programming manual look up "Station Message Detail Recording".
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K
  • Locked
  • Question Question
Dterm as attendant station
Replies
0
Views
211
kozzy
K
RonL2
  • Locked
  • Question Question
SV9500 Station to Station restriction
Replies
4
Views
987
hcmbmt
hcmbmt
vgnec
  • Locked
  • Question Question
SV9500 - Station RSC
Replies
5
Views
635
vgnec
vgnec
lev666
  • Locked
  • Question Question
SV9300 station to station call restriction
Replies
4
Views
541
rolon
rolon
Waleed Alomour
  • Locked
  • Question Question
Polycom studio station
Replies
0
Views
233
Waleed Alomour
Waleed Alomour

Part and Inventory Search

Sponsor

Back
Top