Static PAT confusion 1

[jmurfin]

I am trying to set up two internal hosts (each using different protocols - one using RDP and one using SSL) to be accessed via the same external IP. I believe my best bet is Static PAT, but the config examples for PIX 6.3(3) on Cisco's web site are not helping me. Anyone have an example I might use, please?

Thanks for any help you might have!

- Jeff

 

[rudeboy]

static (inside,outside) tcp <interface or public IP> 3389 <private ip> 3389 netmask 255.255.255.255

Then do the same thing for SSL (TCP port 443). Make sure your access-list or conduit permits your traffic.

 

[jmurfin]

Ah, that explains it better. Thanks so much for the quick help!