Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Startalk 4 Port - Restore Factory Defaults ? 1
- Thread starter DaveUK
- Start date
-
1
- #2
You can reinstall a flash. When you reinstall flash, all configuration programing is lost. You will have to initilize the flash again.
Enter the admin code F983 PW=120000 1020000 10020000 probably one of these press 1 press password 734678255 and press OK
then press yes to reset database.
When the system has been reinstalled, you must initalize the flash.
To initalize
F983
PW=266344
Follow the prompts.
I hope this helps.......
Enter the admin code F983 PW=120000 1020000 10020000 probably one of these press 1 press password 734678255 and press OK
then press yes to reset database.
When the system has been reinstalled, you must initalize the flash.
To initalize
F983
PW=266344
Follow the prompts.
I hope this helps.......
Note that after initialization you may have to activate the voicemail feature code range by dialing F903 first.
Brian Cox
Brian Cox
- Status
Similar threads
- Locked
- Question
