Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stability of 3.2.17?
- Thread starter yipster
- Start date
Hi
I have one new install running 3.2.17 and it seems stable.
This install is not running VM Pro though, so no comments there.
Isaac Braca
CTO / ICCS & Co., LLC.
Email: braca@iccsllc.com
ICCS, Your Premier IT Partner, is a NYC Based Avaya Business Partner and IT Consulting Firm.
I have one new install running 3.2.17 and it seems stable.
This install is not running VM Pro though, so no comments there.
Isaac Braca
CTO / ICCS & Co., LLC.
Email: braca@iccsllc.com
ICCS, Your Premier IT Partner, is a NYC Based Avaya Business Partner and IT Consulting Firm.
I was administering a 403DT 2.1(51)unit with the 3.2 Manager. All the Index phones DSS keys were configured with "User" etc. When I changed something in short codes with 3.2 Manager all the quotes were removed from the DSS keys. I had to redo all the the DSS again with quotes with an 2.1 Manager.
telecomtekperson
Vendor
We upgraded our office 403 to 3.2. The labeling for the Appearance tabs was fouled up. Otherwise, no problems as of yet.
- Thread starter
- #5
We experienced a small problem with voice mail Pro.
We upgraded our own office system today - testing for our office before we implement for our customers.
I check my voice mail messages. System says I have 4 new messages (for example). Listen to #1, and delete. #2 and delete. #3 and delete. #4 and delete. Then it plays message #5 (???). Dead air. Delete. Message #6. dead air. delete. Message #7. dead air. delete. Message #8. dead air. delete.
This keeps happening and only started with 3.2.
Has anyone else experienced this ?
We upgraded our own office system today - testing for our office before we implement for our customers.
I check my voice mail messages. System says I have 4 new messages (for example). Listen to #1, and delete. #2 and delete. #3 and delete. #4 and delete. Then it plays message #5 (???). Dead air. Delete. Message #6. dead air. delete. Message #7. dead air. delete. Message #8. dead air. delete.
This keeps happening and only started with 3.2.
Has anyone else experienced this ?
If your system runs fine today and you don't need any of the new features you probably shouldn't upgrade.
Waiting for the next 3.2 release doesn't really guarantee anything since there been bugs appearing before in second version releases, some pretty major.
There are already know issues that ain't gonna be fixed before 3.2 sept or 4.0 so check that list first since you though 3.1 was to buggy and all the 3.1 bugs aren't fixed yet.
Saying this I can also say that been running 3.2 fine and fixed some bugs especially with twinning that your customers will be happy about.
Waiting for the next 3.2 release doesn't really guarantee anything since there been bugs appearing before in second version releases, some pretty major.
There are already know issues that ain't gonna be fixed before 3.2 sept or 4.0 so check that list first since you though 3.1 was to buggy and all the 3.1 bugs aren't fixed yet.
Saying this I can also say that been running 3.2 fine and fixed some bugs especially with twinning that your customers will be happy about.
kristiandg
Programmer
I had the VM (dead air) issue during the beta trials. Hasn't happened on the GA but once, which I felt could have been the far end of the call. If it happened again, was going to report it.
Kris G.
Kris G.
V3.2 seems robust so far
there are a number of known issues from the dfield trials & a few more that have co to light recently but none of them would currently be classified as "show Stoppers".
However stick with the rule of "if it aint brioke dont fix it" & only upgrade if you need V3.2 features
there are a number of known issues from the dfield trials & a few more that have co to light recently but none of them would currently be classified as "show Stoppers".
However stick with the rule of "if it aint brioke dont fix it" & only upgrade if you need V3.2 features
- Status
