telecomgear
Technical User
I finally set up an st500 behind an NEC 2100 system and it connects but I have no audio either way any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
St500 no audio
- Thread starter telecomgear
- Start date
- Status
belevedere
Instructor
check if you put IP on 84-26-01
Make sure it's in the same subnet as the address in 10-12-07. And no conflicts. Both need to be static addresses.
Make sure it's in the same subnet as the address in 10-12-07. And no conflicts. Both need to be static addresses.
OzzieGeorge
Programmer
Also check any firewall you have installed
- Status
Similar threads
