Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SS7 in mxone?
- Thread starter user25
- Start date
- Thread starter
- #3
Thanks parnum!
then the board tlu76/4 handels both signaling over TS16 and speech over the other channels!
but when initiate the signalling link with the command MTSLI, i don't undestand what the parameter Bpos refer to??
bpos is the position of the TLU76/4?? and what is also the meaninig of the parameter PCMID???
if i've initiated a route to the PSTN with command rocai rodai roeqi, how to make the liason between this oute and the signalling route initiated with MT commands??
then the board tlu76/4 handels both signaling over TS16 and speech over the other channels!
but when initiate the signalling link with the command MTSLI, i don't undestand what the parameter Bpos refer to??
bpos is the position of the TLU76/4?? and what is also the meaninig of the parameter PCMID???
if i've initiated a route to the PSTN with command rocai rodai roeqi, how to make the liason between this oute and the signalling route initiated with MT commands??
paxromanum
Vendor
SS7 in MD110/TSW/MX-ONE is Limited TUP according to Chinese requirements only, and is only available in the Chinese market.
- Status
Similar threads
- Locked
- Question