SP-REG-M alarm

[mattKnight]

Hi

CM 5.2.1 with 2 processors in a Main/LSP configuration.

my main processor shows

display alarms

ALARM REPORT

Port Mtce On Alt Alarm Svc Ack? Date Date
Name Brd? Name Type State 1 2 Alarmed Resolved

SP-REG-M n MINOR y 03/09/10:56 00/00/00:00

which indicates that theMain processor and LSP missed a defined number of keep-alive messages. The docs suggest that I should see an alarm on the LSP (SP-REG-S I'd guess) but I don't.

The other cause suggested is a badly configured LSP entry

list survivable-processor

SURVIVABLE PROCESSORS
Name Type IP Address Reg Act Translations Net
Updated Rgn

XXXXXXXX LSP XXX.XXX.XXX.XXX y n 22:00 3/13/2011 2

The Node name is correct, the IP address is correct and the network region is correct. The LSP is registered and inactive.

the only relevant change (which has been reversed) was to alter

display survivable-processor XXXXXXX Page 2 of 3
SURVIVABLE PROCESSOR - IP-SERVICES
Service Enabled Store Local Local Remote Remote
Type to dsk Node Port Node Port
CDR1 i n procr 0 logger 9000

enabled from i to n

Any idea on how to clear it?


Take Care

Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.