Some DDR questions

[dutronc66]

Hi,

This is the first time i work with Cisco. I have to connect a central route (Cisco 2610) with 6 Cisco 803 on a unique BRI interface (ISDN). The 803 routers should connect with the 2610 and the 2610 should connect with them.

Can i do this with a snapshot configuration?
Which is the best configuration?

Thanks

 

[ADB100]

Static Routing is the easiest IMO. You are only dealing with 7 routes here (possibly a few more and/or a default?).

Good luck

Andy