Sol Install problem

[Guest_imported]

Installing Sol 7 on a p133 on an 8GB harddrive.&nbsp;&nbsp;Everything seems to install ok.<br>When it starts to reboot the machine shuts down and the reboot sound comes on but nothing happens. <br>If I then reboot and have the configuration assistant disk in the drive it will work but I must have the disk in the drive everytime I boot up.&nbsp;&nbsp;Also everything is initialized again as if it was booting up for the first time.<br>This is what I have attempted to solve the problem:<br>Formated the harddrive;<br>Removed all partitions;<br>Made the disk into a solaris and a dos partition;<br>One other note: Option 2, jumpstart, doesn't work.&nbsp;&nbsp;Get a message can't find rule in rule.<br>

 

[cassim]

Hi,

Is your HDD SCSI or IDE?
You may want to check that the HDD is the primary boot device. Hope this helps

 

[Guest_imported]

It is an EIDE drive and it is the only HDD on the machine.