SNMP Community String - How to remove?

[demanding]

How can you remove an SNMP community string that is not needed? I'm in a G430 where I have some strings that I would like to remove as they are not needed...to clean it up and make sure the correct string is being used...is there a way to remove them?

 

[AvayaTier3]

Use the Avaya Gateway installation Wizard



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[AvayaTier3]

Use your documentation on g430 and lookup snmp

see attached

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[demanding]

I did...it appears you have to be connected to the G430 services port - is that always true or can you access it remotely? I suppose this is the only way to remove an entry? Can't do it through telnet?

 

[AvayaTier3]

CLI

G430-001(super)# no snmp-server help
No snmp-server commands:
---------------------------------------------------------------------------
no snmp-server community Disable SNMPv1 service (community based)
no snmp-server dynamic-trap-manager
Toggles off notification type filters from dynamic trap manager instance
no snmp-server engineID Set the SNMPv3 engineID to default
no snmp-server group Delete SNMPv3 group (vacm mib)
no snmp-server host Remove SNMP notification (trap or inform) receiver or filters
no snmp-server notifications
Disable sending SNMPv3 notification (trap and
inform)
no snmp-server remote-user Delete SNMPv3 remote user (usm and vacm mib)
no snmp-server user Delete SNMPv3 user (usm and vacm mib)
no snmp-server view Delete SNMPv3 view (vacm mib)



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

37 years Bell, AT&T, Lucent, Avaya
Tier 3 for 27 years and counting

http://bshtele.com

 

[demanding]

Excellent! Thank you very much. I was trying to get into the wizard from the LSP and could not get past the SNMP comm. string. It does not tell you if it does not like what you enter.