SMDR setting OS4000 Ver8

[John_007]

Hi guys,
Need basic help is Unify OS 4000 Version 8. Need to activate SMDR on Atlantic port.
System is running is DUPLEX mode.
Currently only required commands to turn ON SMDR in basic/default format.
It will be helpfull if someone share the same & explain in details.

 

[sbcsu]

Hi John,
The SMDR is the term normally used on systems that are a lot easier to 'turn on' the call charging !

The 4K is too configurable with CDR - Call Detail Recording (Station Message Detail Recording - SMDR)

You would need to turn it on as a feature, turn it on for classes of service, add in how and where you want it to output.

The following Administration and Maintenance Orders (AMO's) are relevant.

GEZU
GEZAB
FTBL
FBTN
TEXT
SELS
SELG
LSSM

And more.

If you have access to a working system where the call charging is setup then you might be able to copy out the relevant information, however I would recommend that you contact your service provider and get them to turn it on for you.

 

[eniyamath]

try as below

ADD-FTBL:5,B,FORM,1,N,"$#@@@@+#@@@+#@@@@@@@@@@@@@@@@@@@@@+#@.#@.#@. +#@.#@.#@@@. +#@.";
ADD-FTBL:5,B,FORM,2,N,"#@.#@.+";
ADD-FTBL:5,B,CTRL,3,N,CR;
ADD-FTBL:5,B,CTRL,4,Y,LF;
ADD-FTBL:5,B,FIELD,1,CHRGEE,CHAR," ",R;
ADD-FTBL:5,B,FIELD,2,TKNOBCHA,CHAR," ",R;
ADD-FTBL:5,B,FIELD,3,DESTPTY,CHAR," ",L;
ADD-FTBL:5,B,FIELD,4,CONHOUR,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,5,CONMIN,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,6,CONSEC,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,7,ENDDAY,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,8,ENDMONTH,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,9,ENDYEAR,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,10,ENDHOUR,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,11,ENDMIN,CHAR,"0",R;
ADD-FTBL:5,B,FIELD,12,ENDSEC,CHAR,"0",R;


ADD-GEZU:TTY,DEV2,TTY,TERM2;

ADD-SELG:SELG,2,N,DEV2,NODEV,1,0;
CHANGE-SELG:SELT,2,1,FORM05,NOFORM,NOCALC,A22;
CHANGE-SELG:SELT,2,1,,,,,0&&999999
;
CHANGE-SELG:SELT,2,1,,,,,,VOICE ;
CHANGE-SELG:SELT,2,1,,,,,,,0&&15;
CHANGE-SELG:SELT,2,1,,,,,,,,ALL,ALL,N,N,Y,N,N,N,N,N,N,N,N,N,N,N,N,N,N;
CHANGE-SELG:SELT,2,1,,,,,,,,,,,,,,,,,,,,,,,,,,,0,000005;
CHANGE-SELG:SELT,2,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
0&&999,
0&&254,
0&&30;
CHANGE-SELG:SELT,2,1,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,N,N,
INTERN&INCO&OUTG
,0&&8,0&&9,ALL;

ACT-LSSM:A1,2;

ACTIVATE-SELS:2;

 

[persi01]

Resolved.
Thanx sbcsu & eniyamath, with old regen & ur information.