Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

The Date Of OS4000 V8 not Valid

Tosu

Technical User
Jun 10, 2015
87
0
6
ID
Hello

i have confuse about setting date at unify os4000 V8. I have done with programme cha-date and exec-date but both of those not change of date. how can do it
 

Attachments

  • Date probelm  2024-08-28.jpeg
    Date probelm 2024-08-28.jpeg
    46.7 KB · Views: 8
Date on V8 is set with NTP - Network Time Protocol
 
An XML file created the V8 - in that XML is the IP address of the NTP server.
If it's a demo system then some domestic routers do transmit NTP
 
Changing time directly on Linux-Host command line, if duplex do on both processors:
# date -s 17:25 or # date -s "YYYY-MM-TT hh:mm:ss"
# date -s "2012-12-31 09:51:24" => date & time. changed
 
Indeed - thanks for that - but the clock will drift which is where the NTP comes in.
You can setup an NTP server on a computer on your network
 

Part and Inventory Search

Sponsor

Back
Top