We are picking up the SL2100 after Panasonic left the business and was wondering if anyone has a cheat sheet or anything they use as a good starting point for all new installs. While I know each install is unique, there are typically things like toll restricting Vmail ports, setting system timers, forwarding phones... that apply to most systems.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SL2100 Cheat Sheet
- Thread starter phones001
- Start date
OzzieGeorge
Programmer
There are Videos available, ask the question here....
Programme Memory Block and Data Comments
Standard Change Country, Timezone
10-04 01 = VMDB 02 = 100 VRS on 2100
10-12 04 = Change to GMT + 10
10-24 01 = Untick Only if you dont observe DST
10-33 02 = Tick
11-02 01 = Change extension numbers . MLT start from 101, SLT start fom 151 See Excel sheet
11-04 01 = Virtual Extensions start from 201
11-07 01 = Change Pilot number from 199/3999 to 3000 for group 32 /64 (SV9100)
11-15 09 = Change this to 766
12-07 01 = Change name for:- Mode 3 = <Holiday>, Mode 4 = <Custom>
12-08 02 = Tick Puts light on night button
13-01 03 = Change to 1000 Bins SL1100 Only
14-01 01= Change Trunk names, ie Outgoing, Line 001 ect
14-01 22 = Tick. Caller ID to Email On SV9100
14-02 12 = Tick, 18 = Tick
14-05 01 = Unused Trunks to Group 0, 02 = Change priority
14-06 01 = Change to 1, 2, 3, 4 for route Table 01
14-07 01 = Trunk access as required
15-01 01 = Name Extension, 02 = Tick If used for Fax or EFTPOS Per extension
15-02 12 = Muted off hook, 13 = Trunk Mode, 21 = Change to DSS, 60 = Standard Per extension
15-03 09 = Caller ID External Module Per SLT extension
15-06 01 = Put extensions in to Different groups if required. Per extension
15-07 01 & 02 = Programme as required. Use button 23&24 for Message and Night
16-01 01 = For Departmant GRP 32 (SL1100) or GRP 64 (SV9100) name Voice mail
16-02 01 = For ICM Extension 3001-3002 = GRP 32 & 3003-3016 = GRP31
20-07 01 = Tick (SV9100), 13 = Tick, 14 = Tick, 15 = Tick (COS 1 &15) Per extension
20-08 20 = Tick Per extension
20-11 12 = Tick SV9100 Only
20-13 05 & 06 & 07 = Untick Per extension
20-14 03 = Untick
20-15 05 & 09 = Cycle 3 Per extension
20-34 Change All Tables Conference timer to 64800 Per extension
21-01 05 = Set to 0 For speed dials to work, 15 = Untick SV9100 only
21-04 Set all 3001-3016 to COS 6
21-06-01 01 - 0011
21-06-04 01 = 000
21-13 01 = Put full dir number in, Fax extn would have its own dir No (only for ISDN) Per Extnsion
21-24 01 = Remove 000 Australia SV9100 only
22-01 04 = DIL no answer time (If PGM 22-08 used) 07 = DID Second target timer
22-02 01 - 04 = Set for Mode1 - Mode 4 ie VRS,DID,
22-04 01 = Set up Ring Groups as required
22-09 01 = 8
22-11 Switch to Grid View, Copy/Paste Tables from 'Ports' Change 001 to Prime, 002 Aux etc
22-13 01 = 1, 02= 2, 03 = 3, 04 = 4 Per Trunk Group
22-14 01 = 10, 02 = 1, 03 = 1, 06 = Music On Hold, 07 = 64800 For ring groups
24-01 01 = 120 - 03 = 120
24-09 01 & 02 = 3000 for extn 201 SL1100 & SV9100
25.02 Mode1 01= VRS Message, 02 = 1, Mode2 = 01 VRS Message, 02 =2, Mode3 01 = VRS Message, 02 = 3, Mode4 01= VRS Message, 02 = 4 Only PSTN
25-03 02 = 0, 03 = 0, 04 = 0 Per Trunk
25-06 Set as per Ad on hold
25-07 01 = 6, 03 = 320
47-02 01 = Personel, 02 = 201, 03 = 99, 12 = Untick Use mailbox 1 on SV9100
90-01 Set install date
90-02 01 = , 02, 03,04 unauthorized
These are defaults I do on almost every system and then modify from there.
Standard Change Country, Timezone
10-04 01 = VMDB 02 = 100 VRS on 2100
10-12 04 = Change to GMT + 10
10-24 01 = Untick Only if you dont observe DST
10-33 02 = Tick
11-02 01 = Change extension numbers . MLT start from 101, SLT start fom 151 See Excel sheet
11-04 01 = Virtual Extensions start from 201
11-07 01 = Change Pilot number from 199/3999 to 3000 for group 32 /64 (SV9100)
11-15 09 = Change this to 766
12-07 01 = Change name for:- Mode 3 = <Holiday>, Mode 4 = <Custom>
12-08 02 = Tick Puts light on night button
13-01 03 = Change to 1000 Bins SL1100 Only
14-01 01= Change Trunk names, ie Outgoing, Line 001 ect
14-01 22 = Tick. Caller ID to Email On SV9100
14-02 12 = Tick, 18 = Tick
14-05 01 = Unused Trunks to Group 0, 02 = Change priority
14-06 01 = Change to 1, 2, 3, 4 for route Table 01
14-07 01 = Trunk access as required
15-01 01 = Name Extension, 02 = Tick If used for Fax or EFTPOS Per extension
15-02 12 = Muted off hook, 13 = Trunk Mode, 21 = Change to DSS, 60 = Standard Per extension
15-03 09 = Caller ID External Module Per SLT extension
15-06 01 = Put extensions in to Different groups if required. Per extension
15-07 01 & 02 = Programme as required. Use button 23&24 for Message and Night
16-01 01 = For Departmant GRP 32 (SL1100) or GRP 64 (SV9100) name Voice mail
16-02 01 = For ICM Extension 3001-3002 = GRP 32 & 3003-3016 = GRP31
20-07 01 = Tick (SV9100), 13 = Tick, 14 = Tick, 15 = Tick (COS 1 &15) Per extension
20-08 20 = Tick Per extension
20-11 12 = Tick SV9100 Only
20-13 05 & 06 & 07 = Untick Per extension
20-14 03 = Untick
20-15 05 & 09 = Cycle 3 Per extension
20-34 Change All Tables Conference timer to 64800 Per extension
21-01 05 = Set to 0 For speed dials to work, 15 = Untick SV9100 only
21-04 Set all 3001-3016 to COS 6
21-06-01 01 - 0011
21-06-04 01 = 000
21-13 01 = Put full dir number in, Fax extn would have its own dir No (only for ISDN) Per Extnsion
21-24 01 = Remove 000 Australia SV9100 only
22-01 04 = DIL no answer time (If PGM 22-08 used) 07 = DID Second target timer
22-02 01 - 04 = Set for Mode1 - Mode 4 ie VRS,DID,
22-04 01 = Set up Ring Groups as required
22-09 01 = 8
22-11 Switch to Grid View, Copy/Paste Tables from 'Ports' Change 001 to Prime, 002 Aux etc
22-13 01 = 1, 02= 2, 03 = 3, 04 = 4 Per Trunk Group
22-14 01 = 10, 02 = 1, 03 = 1, 06 = Music On Hold, 07 = 64800 For ring groups
24-01 01 = 120 - 03 = 120
24-09 01 & 02 = 3000 for extn 201 SL1100 & SV9100
25.02 Mode1 01= VRS Message, 02 = 1, Mode2 = 01 VRS Message, 02 =2, Mode3 01 = VRS Message, 02 = 3, Mode4 01= VRS Message, 02 = 4 Only PSTN
25-03 02 = 0, 03 = 0, 04 = 0 Per Trunk
25-06 Set as per Ad on hold
25-07 01 = 6, 03 = 320
47-02 01 = Personel, 02 = 201, 03 = 99, 12 = Untick Use mailbox 1 on SV9100
90-01 Set install date
90-02 01 = , 02, 03,04 unauthorized
These are defaults I do on almost every system and then modify from there.
- Status