We have 2 new 2801 routers in two different locations. The telephone company has installed two cisco IAD's to deliver trunks and internet to each location. Thy told us they were going to bond the two IAD's together for us. What they are really going to do is just put a policy that says traffic going between these two networks will not go out to the internet. They will also provide us with QOS using DSCP. I have only done voip over point-to-point t1. I have not had to use NAT. What I am reading is that I will probably only get one way audio becouse nat does not deal with the RTP traffic. Are their any workarounds for this yet without using a VPN? Thanks for any help
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Sip using Nat
- Thread starter dontworx
- Start date
Similar threads
- Locked
- Question
- Locked
- Question