SIP trunking with an AudioCode mediant 1000

[NYSTECH]

IPO 500 6.0.8
Licensed for SIP trunking.

I have a customer with an AudioCode Mediant 1000.

They want to set up SIP trunking between the 2 and I am looking to see if anyone has done this or point me in the direction for Documentation as to the configuration of both IPO and AudioCode.. I have Checked the Avaya support and Devconnect sites but nothing specific on AudioCodes and IP office.

Any information would be helpful..

Thanks

 

[intrigrant]

It is on my task list for quit hours.... did not have had any yet.

 

[hibroth]

I did it today !
I was able to immediately set up the outgoing calls to the AC, but I fight a little bit for the incoming ones.
Finally, analyzing the sysmon I saw the AC needs to set up the call via TCP instead of UDP (that's the default).
Now calls are running, but tAC has to be set up better to send the right uri id.

 

[NYSTECH]

Could you provide me with the Config information you used for both?

 

[NYSTECH]

Hilbroth

I am not having much luck,,,would you point me to the Docs to set this up/