SIP TRUNK TO IPOFFICE help

[CarlosPrex]

thread690-1718974
SIP TRUNK TO IPOFFICE (morenot OP)

Hi
About two weeks ago I posted a question about this and some members tried to help with no luck for me
Now I´ve just reached this 2013 post!!
and I wonder if there´s any chance you could share some kind of .txt file with the set up screens of CM and IPOffice

THANKS IN ADVANCE

"We have CM to IP Office by SIP Trunk (NO using SES or Session Manager)
When we call from IP Office to CM, the caller ID is showed ok
When we call from CM to IP Office, there is not caller ID, showed "anonymous"

Any idea?

Thanks in advance

JLMT//
----------------------
montyzummer (IS/IT--Management)
25 Sep 13 21:55
if you are using private unknown table must populate, and trunk is set to private on the route pattern set to lev-0 works for me
------------------------

morenot (TechnicalUser) (OP)
26 Sep 13 10:54
Thanks montyzummer:

I resolved the detail..

I am using public unknown, the problem was I don´t had populated the digit of local extensions

JLMT//