SIP Anonymous Call Block 2

[Shortcode]

I am now trying to block anonymous inbound calls using the IPO. I know how to achieve this on a PRI or ISDN, however the same codes (! and ?) do not apply here. Anyone done this?

"If you do things right, people won't be sure you've done anything at all."

 

[Bas1234]

add a new SIP URI and enter anonymous in the
"local uri/contact/display name"
Make sure your provider supports "anonymous" option or something like it.


You could change the "outgoing group id" to a different number, then add a shortcode ##N"@xxxxxxxx"
Then when someone pressess ## infront of the number it will sent it "anonymous"

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[IPOfficeIreland]

he is trying to block inbound anonymous calls Bas, not send outbound. But also needs it to be exact in the manual, no workaround tolerated, so my solution won't help either.

 

[hairlessupportmonkey]

Ok here is what I did to make this work

New ICR

Incoming Number = *

CLI = anonymous@anonymous

Destination = <where ever you want>

works a treat on our SIP trunk and on v 5