Signaling Group Warning

[namesrhard2pick]

I have a warning alarm for two of my signaling groups. The maintenance test number is 639 and the error code is 1132. These are facility associated signaling groups. I would appreciate any feedback on what this test/error represents.

 

[mikeydidit]

Secondary Signaling Link Hardware
Check (#639)
The ISDN-PRI Signaling Group D-channel port depends on the health of the TN464C or higher
suffix UDS1 Interface circuit pack or MM710 DS1 Interface Media Module on which it resides.
This test will fail if there are problems with the ISDN-PRI Secondary D-channel port, or the
UDS1 circuit pack, or the MM710 DS1 Media Module. This test will abort if a Secondary D
channel is not administered for the signaling group. If there are problems with the ISDN-PRI
Secondary Signaling Channel port (ISDN-LNK), also investigate the UDS1 circuit pack

1132 ABRT 
The Secondary D channel is not administered for this Signaling Group. This is
a NORMAL ABORT. Only a Primary D channel must be administered for a Signaling Group.

1 of 2

Page 1464
Maintenance Alarms for Avaya
Communication Manager 3.1,
Media Gateways and Servers
03-300430
Issue 2


When is the last time you helped someone, just because you were able to?

For the best response to a question, read faq690-6594