Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Signal trace

Status
Not open for further replies.

trimaran

Technical User
Joined
Jun 21, 2007
Messages
1
Location
BG
Hi All,
I want to make a Signal trace for E1.How can I do that?
My PABX is VERSION=CXP1010110/2/BC12SP5/R2A
Thanks in advans.
 
if you are talking about an ISDN E1 then to this:

STISR;
STUNI:UNIT=SLP60,LIM=X,MSKSIG=02&03&A1,STORE=YES;
STTSI:TRI=1;
/* make testcalls */
STTSE:TRI=1;
/* OPEN LOGFILE */
STRAP:TRI=1;
/* CLOSE LOGFILE */

you can analyze the logfile with Signal trace Interpreter (It can be found in the SAM toolboox suite)

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top