Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Shutdown UPS by command line

Status
Not open for further replies.

FelipeTersa

Programmer
Apr 18, 2012
1
Hi all,

I have a Smart-UPS RT 6000 XL connected with a Linux Server by network cable and a Network Management Card 2 AP9631.
I have too a Smart-UPS 3000 XL connected with another Linux Server by 940-0127E FCI cable (USB).

My whole system is based in Linux OS (Fedora).

My problem is: I want to know how I can, by command line (by terminal, shell), shutdown these two UPSes.
I've tried PowerChute, but PC Server and Console Edition run just in Windows, right?

By the way, i'd want a command that I could turn on the UPSes, after they be shutted down, just pressing the power button(by physical way).

Thank you all!!
(Sorry about my english, its very defective)

(I want to do this for protection's issues)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top