Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SGI Challenge: Hardware Inventory Lockup

Status
Not open for further replies.
unit037

unit037

Technical User
Jul 30, 2004
1
US
I just got an SGI IRIS Challenge L Series deskside server and it does not have a monitor port. So, I rigged up a serial cable to use the primary terminal. So now, when it boots up, I get diagnostic information, then it goes into "Checking Hardware Inventory" then asks me to press <enter> but when I press enter it doesn't do anything. I even tried hooking up an SGI keyboard and pressing <enter> there but that doesn't work either. My IO4 board seems to pass the diagnostics...

Any ideas would be appreciated!
 
Status
Not open for further replies.

Similar threads

TaufeekT
  • Locked
  • Question
SCO 5.0.5 hardware upgrade
Replies
4
Views
353
motoslide
motoslide
fatigatti
  • Locked
  • Question
Best hardware for SCO OpenServer 6?
Replies
1
Views
194
PHV
PHV
rockandrollmachine
  • Locked
  • Question
Recovering OpenServer 5.0.6 onto different hardware
Replies
6
Views
294
rockandrollmachine
rockandrollmachine
seacros
  • Locked
  • Question
File inventory scan
Replies
3
Views
115
elgrandeperro
elgrandeperro
kozlow
  • Locked
  • Question
SDLT Hardware issue - DataProtector
Replies
0
Views
99
kozlow
kozlow

Part and Inventory Search

Sponsor

Back
Top