Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SGBP - Multilink and VPdN

Status
Not open for further replies.
thekidcisco

thekidcisco

Technical User
Mar 6, 2001
29
AU
Clients multilink is failing via CiscoNAS, aggregates via 7200's. Problem is with the Lucent NAS, though it was working before, now the aggregation is being denied. Debugs indicate nothing noteworth, IOS caveats show nothing of use. Any hints/tips? SGBP is the protocol used for aggregation on the 7200's, these are then tunneled into the cloud of the ISP.
 
Status
Not open for further replies.

Similar threads

CPM86
  • Question
Cisco isr 4331 with IOS and sip busy fail over to 2nd sip number on pbx?
Replies
0
Views
321
CPM86
CPM86
Lccarter
  • Locked
  • Question
Cisco CUCM Provisioning and Order Management System
Replies
1
Views
391
Lccarter
Lccarter
acabezas2014
  • Locked
  • Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
243
acabezas2014
acabezas2014
mrdom
  • Locked
  • Question
RV325: Accessing LAN and WAN resources using the same hostname ...
Replies
0
Views
243
mrdom
mrdom
dmourghen
  • Locked
  • Question
PBR issue and Access-list
Replies
0
Views
255
dmourghen
dmourghen

Part and Inventory Search

Sponsor

Back
Top