Setting up Meirdian Mail on an Option 11

[FireFighter78]

I have an Option 11 (Version 1411 Release 21 Issue 35 +) and I am setting up Meridian Mail (circa 1996) on it. Supposedly they are from the same working system.

Last week I changed my CFN in LD 17 and added AML's 8 and 9; when I enable the console and the AML data ports I get an AMLM022 08 error and LNK055 for 8 and 9 respectively.

Did I miss a step or 2 (maybe I did something last week that I forgot to mention here)?

What follows is my repeating errors and the errors that I received while enabling.

Thank you for your assistance!!
Barry



TIM000 10:00 23/2/2009 CPU 0

AUD000
CSA001 8 10:14:26 23/02/2009 9
CSA001 9 10:14:26 23/02/2009 9
CSA001 8 10:31:56 23/02/2009 9
CSA001 9 10:31:56 23/02/2009 9
AUD000
CSA001 8 10:49:26 23/02/2009 9
CSA001 9 10:49:26 23/02/2009 9
TIM000 11:00 23/2/2009 CPU 0

AUD000
CSA001 8 11:06:56 23/02/2009 9
CSA001 9 11:06:56 23/02/2009 9
CSA001 8 11:24:26 23/02/2009 9
CSA001 9 11:24:26 23/02/2009 9

OVL111 000 IDLE

TTY 00 SCH MTC 11:26
LOGI
PASS?
.
TTY #00 LOGGED IN 11:26 23/2/2009

>LD 22
PT2000

REQ ISS

VERSION 1411
RELEASE 21
ISSUE 35 +


REQ END
>AX
>
TIM000 11:38 23/2/2009 CPU 0

ERR609 LD 48
LNK000
.ENL AML 8 LYR2
AMLM022 08
.ENL AML 9 ACMS
LNK055

 

[phonz1]

AML should be for the Meridian Mail, LSL (low speed link ) on tty 8, not aml

 

[cmawbey]

also try

LD 48 enl aml 8 acms

 

[telebub]

I would OUT AML 8 and build TTY 8 as phonez1 states above. Also use the command Giblett mentions but for AML 9, not 8.

LD 48
.enl aml 9 acms

War Eagle!
Lions Baseball '09!

 

[FireFighter78]

I am partially getting this.

I OUTed AML 8 and built TTY8

Then I did -
>LD 48
LNK000
ENL AML 9 ACMS
LNK055

Could someone hold my through this - preferably female mid 30's - ok I'll stop now

Thanks for your help

 

[GHTROUT]

Try .STAT AML 9 - see if it knows it's there.

~~~
[small]GHTROUT.com | CS1000 Programming and Feature Guides | Tek-Tips FAQs | Recent Replies[/small]

 

[yyrkroon]

post your adan on tty 8 and aml 9 - lets make sure those are correct first.

 

[FireFighter78]

Here you go and thanks in advance


>LD 48
LNK000
.STAT AML 9
AML: 09 ESDI: 09 DES: MERIDIAN_MAIL
LYR2: AUTO SETUP LYR7: NO VAS ID DEFINED
.
TIM000 09:15 24/2/2009 CPU 0

CSA001 9 9:15:22 24/02/2009 9
STAT AML 9
AML: 09 ESDI: 09 DES: MERIDIAN_MAIL
LYR2: AUTO SETUP LYR7: NO VAS ID DEFINED
.END
>LD 22
PT2000

REQ PRT
TYPE CFN

ADAN HIST
SIZE 10000
USER MTC SCH BUG
ADAN TTY 0
CARD 00
PORT 0
DES
USER MTC SCH
XSM NO
ADAN TTY 2
CARD 00
PORT 2
DES WOBURN
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER SCH BUG
XSM NO
ADAN TTY 8
CARD 10
PORT 0
DES MERIDIAN_MAIL
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOW NO
USER LSL
XSM NO
ADAN PRT 4
CARD 00
PORT 1
DES ACDPRT
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOW NO
USER ACD
CUST 00
SSUP NO
APRT YES
XSM NO
ADAN AML 9
CARD 10
PORT 1
DES MERIDIAN_MAIL
BPS 4800
CLOK INT
IADR 003
RADR 001
T1 04
T2 010
T3 010
N1 128
N2 08
K 7
RXMT 05
CRC 10
ORUR 005
ABOR 005
ENL YES
PARM
******** cut hopefully unnecessary stuff

 

[phonz1]

that looks correct, what happens now when you boot mail? Remember, unless you are installing s/w, boot with the tape out of the drive.

Boot mail and in the 11, in LD48 enl aml 9 acms, and wait, you should see a CSA003 in a few minutes, remember, mail is slow, be patient

 

[GHTROUT]

What does this mean?

LYR7: NO VAS ID DEFINED

~~~
[small]GHTROUT.com | CS1000 Programming and Feature Guides | Tek-Tips FAQs | Recent Replies[/small]

 

[yyrkroon]

I would say that the LSL and AML was configured but the VAS was not.

There's a VAS ID associated with AML 9.

 

[FireFighter78]

So I added the VAS, ACD 7000 and 8 Merdian Mail 2008’s. I still was receiving the CSA001 9 time/date 9 every 30 minutes. I got frustrated with the whole thing and did an EDD then power cycled the main cabinet. Set the time and date and worked on other projects for the rest my day yesterday. When I came into work this morning I was greeted with a lot more of the following errors.

When I dial 7000 I get “Release and try again”.

When I access the Meridian Mail terminal (using AX) I instantly receive AMLM024 8 and no response from Mail (I am not surprised by this, just added in case it is helpful)

Could the NTAK14 card be bad? Or am I missing something else?

Thanks again,
Barry


AMLM024 08

CSA001 9 8:27:44 26/02/2009 4
AMLM024 08

CSA001 9 8:28:14 26/02/2009 4
AMLM024 08

CSA001 9 8:28:44 26/02/2009 4
AMLM024 08

CSA001 9 8:29:14 26/02/2009 4
VAS008 ADMIN VSID 9 CUST -- TIME & DATE
TIM000 08:29 26/2/2009 CPU 0
8:29:24 26/02/2009

AUD370 VSID 9 CUST --
AUD370 4020 VCE -- DTA -- CTN --

AMLM024 08

CSA001 9 8:29:44 26/02/2009 4
AMLM024 08

CSA001 9 8:30:14 26/02/2009 4
AMLM024 08

CSA001 9 8:30:44 26/02/2009 4
AMLM024 08

CSA001 9 8:31:14 26/02/2009 4
AMLM024 08

CSA001 9 8:31:44 26/02/2009 4
AMLM024 08

CSA001 9 8:32:14 26/02/2009 4






REQ PRT
TYPE CFN

ADAN HIST
SIZE 10000
USER MTC SCH BUG
ADAN TTY 0
CARD 00
PORT 0
DES
USER MTC SCH
XSM NO
ADAN TTY 2
CARD 00
PORT 2
DES WOBURN
BPS 9600
BITL 8
STOP 1
PARY NONE
FLOW NO
USER SCH BUG
XSM NO
ADAN TTY 8
CARD 10
PORT 0
DES MERIDIAN_MAIL
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOW NO
USER LSL
XSM NO
ADAN PRT 4
CARD 00
PORT 1
DES ACDPRT
BPS 1200
BITL 8
STOP 1
PARY NONE
FLOW NO
USER ACD
CUST 00
SSUP NO
APRT YES
XSM NO
ADAN AML 9
CARD 10
PORT 1
DES MERIDIAN_MAIL
BPS 4800
CLOK INT
IADR 003
RADR 001
T1 04
T2 010
T3 010
N1 128
N2 08
K 7
RXMT 05
CRC 10
ORUR 005
ABOR 005
ENL YES
PARM
LPIB 96
HPIB 16
500B 16
NCR 80
MGCR NULL
CSQI 020
CSQO 020
NCPU 1
CFWS NO
PCML MU
ALRM NO
ERRM ERR BUG AUD
DTRB 100
TMRK 128
FCDR OLD
PCDR NO
TPO NO
TSO NO
CLID NO
DUR5 NO
MLDN YES
MARP YES
FRPT NEFR
DCUS NULL
MSCL 200
PMSI
MANU PMS1
PMCR 20
PORT NONE
NDIS 20
OCAC NO
MTRO MR
SBA_ADM_INS 001
SBA_USER 010
CEQU
MPED 8D
SUPL 000 004 008 012
016 032 036 040
048
XCT 000
CONF 029 030 031
MISP
MTYP 640K
OVLY
SID 0
BKGD 044
PBXH 01
TODR 01
DROL 030 034 035 038 044 053 060
VAS
VSID 09
DLOP
AML 09
INTL 0001
MCNT 9999
CONF DIR
ATRN
CODE 0
SOLR 12
ROLR +45.00
TOLR -45.00
AGCD NO
VOLR NO
HRLR +42.00
HTLR -44.00
ALARM
FMT_OUTPUT : OFF
AF_STATUS : OFF

FILTER ENTRIES SUMMARY
TRIGGER SEVERITY SUPPRESS ESCALATE

NO ENTRIES.


EXCEPTION ENTRIES SUMMARY
TRIGGER

NO ENTRIES.

 

[FireFighter78]

I have made progress.

I reconnected the hard drive and WHAM, BAM the menu came up!