Setting up a UPS 2200 NET on the network

[SOAM]

I would like to set up a APC Smart Ups 2200 Net in our network closet. I am not sure how to discover the device on the network or how to configure it. All I want to do is plug it into a port on the switch SNMP. Can someone point me in the right direction as to what software I need?
Thank you for your help.

 

[MrAPC]

Soam,
You will need either a AP9605 (SNMP), AP9606 or AP9617 (Web/SNMP) card.

You can get away with either the AP9605 or the AP9606 and use the software provided by APC on their site.

You can get these cards either on Ebay or on

http://www.refurbups.com