Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Serious issue with option 11c

Status
Not open for further replies.
LittleMaster

LittleMaster

Technical User
Joined
Sep 16, 2015
Messages
182
Location
PK
Getting this error continuously on my terminal..
evtCollSendEvent (): enqueue BUG5325 failed, queue full.

I am not able to login to the system..No PRI is working..There are tones available on TNS.

ANY SUGGESTIONS PLZ...
 
Sort by date Sort by votes
Received New SSC from vendor.. powered up the system..And it did well ..The new SSC with its default pre configuration ,made ON and and was stable ..I logged in to the system..But when I installed the new software 5.5 as provided in the this forum, the card started to give errors of COM001 Ethernet hardware and adopted same behavior as it was with the previous old SSC card..Re installed the OS but in vein..Now I have both the SSC cards with the same behavior, ...Rebooting after giving errors of COM0001 Ethernet driver and Reason - 36...I don't know what I am missing...
 
Upvote 0 Downvote
What you can try is to plug in the PCMCIA card into the SSC and power it up. Enter "Ctrl I" and once the menu pops up go to "Utilitites" and I think the next one is something like this below done from a SSC 05.00W system.

>LD 143
.UPGRADE

SOFTWARE INSTALLATION PROGRAM
************************************
Verify
Security ID: 10000000
************************************

Call Server/Main Cabinet Software Installation Main Menu :
1. New Install or Upgrade from Option 11/11E - From Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery Card
[q]uit, [h]elp or [?], <cr> - redisplay

Enter Selection : 3

Utilities Menu :
1. Restore Backed Up Database
2. Archive Database Utilities
3. Install Archived Database
4. Review Upgrade Information
5. Clear Upgrade Information
6. Flash Boot ROM Utilities
7. Current Installation Summary
8. Change 3900 series set languages.
9. IP FPGA Utilities
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 6

Flash Boot ROM Utilities Menu :
1. List Flash Boot ROM
2. Upgrade Flash Boot ROM
3. Restore Flash Boot ROM
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection : 1

Flash Boot ROM Summary :

Active -- NTDK34FB_r02
Backup -- NTDK34FA_r11
Software Delivery Card -- card not installed

Flash Boot ROM Utilities Menu :
1. List Flash Boot ROM
2. Upgrade Flash Boot ROM
3. Restore Flash Boot ROM
[q]uit, [p]revious, [m]ain menu, [h]elp or [?], <cr> - redisplay

Enter Selection :


Once in this area, check if the Flash Boot version on the SSC card is the same as found on the PCMCIA card and upgrade it if it as this could be a problem with 5.5 software. You will need to reboot the system again to activate it.




Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Another thing to try is to load the system with a default database. If the system stays working, then it would mean that you have a corrupted database.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Same behavior with the default database
 
Upvote 0 Downvote
How can I find the flash version on PCMCIA ?
 
Upvote 0 Downvote
Flash Boot Summary :
Active -- NTDK34FB_r02
Backup -- NTDK34FA_r10
Software Delivery Card -- NTDK34FB_r02
 
Upvote 0 Downvote
You have the latest flash installed on the SSC card.

I don't understand why your system is failing at the point at which you would normally be able to log in?.

Lets look at this a different way, Are you using TTY 0 as I think you must be, which is the correct port.

Is all other kit removed and only the SSC card installed?

What is the item code of the Daughter board card. This could be a problem as only certain types are compatible.

Have you tried using a different computer or have powered up the system without being connected in case the computer that you are using is causing a fault?.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
I think your daughter board card should be NTTK25BA or later.
Your SSC card should be NTDK20EA or greater with the 16 meg memory card.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Daughter board...NTTK2501
SSC...NTDK20CA , 32 megs
 
Upvote 0 Downvote
System Minimum SSC/Compatible with S/W

11C/Cabinet SSC = NTDK20CA Rlse 24.25 with 4 –5 cabinets – 25.XX and Succession 3

I'm not certain is your "CA" SSC card is supported for release 05.50 software?. I would have sourced a much later card.

I would follow the instructions in my previous reply via the word doc guide on formatting the SSC card by using "Ctrl B" when "Ctrl I" is asked for on the boot up to reload the software again and only select the default configured database. Let the system boot up and see if it is stable.

If this happens, then I would install the patches prior to loading in any backup file or the one from the SSC card.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
I have attached a copy of the 5.5 patches in case you don't have any as they can be installed via the PCMCIA card.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
Thanks FF ...
How can I install patches to the system when it's not logging in ..I think we can install patches in LD 143 or in PDT mode..
 
Upvote 0 Downvote
You do need to be logged into the system and it's done as shown in the attached guide.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Upvote 0 Downvote
SOLVED...
CHANGED THE TTY SERIAL DATA CABLE...

Very simple solution to the problem but took time in catching the fault..

A lot of appreciations to Firebirdscrambler for the help..Thank you sir

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

ATMFIRE
  • Locked
  • Question Question
OPTION 11C keys actiation
Replies
3
Views
756
Firebird Scrambler
Firebird Scrambler
nihaalrai236
  • Locked
  • Question Question
Nortel Option 11C RLS 25 asking for "MODL"
Replies
4
Views
1K
Firebird Scrambler
Firebird Scrambler
Ozphonebloke
  • Locked
  • Question Question
Option 11C PSU cct diagram or voltage pinout
Replies
1
Views
656
Ozphonebloke
Ozphonebloke
htroberts
  • Locked
  • Question Question
how to get into top compartment of 11c cabinet?
Replies
7
Views
870
htroberts
htroberts
LidLock Technologies
  • Locked
  • Solved
Option 11 SDI Cabling
Replies
4
Views
737
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top