Serial 0/0 is down, line protocol is down

[donnaleezeller]

Reply to: donna.zeller@att.net

***********************
Building configuration...

Current configuration : 1034 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$nkMg$eyGeSo7kCi4j/Zy1
!
ip subnet-zero
!
!
!
!
!
!
interface FastEthernet0/0
ip address 192.168.0.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
ip address 192.168.1.1 255.255.255.252
ip access-group 101 in
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-24
service-module t1 remote-alarm-enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 Serial0/0
ip http server
ip pim bidir-enable
!
logging history errors
access-list 101 permit tcp any any eq www
access-list 101 permit tcp any any eq 443
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq 1433
access-list 101 permit tcp any any eq 1755
access-list 101 permit tcp any any eq 7007
access-list 101 permit tcp any any eq 90
access-list 101 deny tcp any any
!
line con 0
line aux 0
line vty 0 4
password jets21
login
!
end

*********************

Router#show interface serial 0/0
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Internet address is 192.168.1.1/30
MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
LCP Closed
Closed: IPCP, CDPCP
Last input never, output never, output hang never
Last clearing of "show interface" counters 00:46:20
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=up DTR=up RTS=up CTS=down

 

[IPKONFIG]

Physical layer issue. Check your cables and connectors. Check power to other equipment.

"I can picture a world without war. A world without hate. A world without fear. And I can picture us attacking that world, because they'd never expect it."
- Jack Handey, Deep Thoughts