Secureclient and WLAN Adapter

[DirkFranke]

I can get access to the network of out company by a VPN connection.

We are using SecureClient (NG with Application Intelligence - R56, Version 615).

The connection works perfectly when connecting via modem, dsl and GPRS.

However, I do not get a connection when connecting via WLan.

For the WLan connection I am using a PCMCIA card that I plug into my computer.

When I try to connect to our company network I get the response from SecureClient that the gateway cannot be reached.

Do you have any idea about the cause of this problem?

The following information maybe important in respect of this problem: When installing the WLan PCMCIA card the first time in my computer it is recognized as plug&play harware and the driver is installed from the driver CD. However, when the installation is complete I get the following message: "There are network adapters that are not protected. SecureClient will not be able to connect to the remote network." (see attached screen-shot)

Any help is very much appreciated.

 

[stooo]

have you tried removing and re-installing the secure client software after the WLAN card is installed? it may then be able to attach itself to the interface

Stu