Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

second dialtone on mics 6.1 pri

Status
Not open for further replies.
scanjet

scanjet

Technical User
Feb 24, 2004
231
US
I do not see a place in programming that says 2nd dialtone
in the 6.1 software how would I make this work?
 
Sort by date Sort by votes
Go to services choose routing hit next till you get to
2nd dial tone hit show then add the digits that you defined in routing. I know it is avilable in 7.0
 
Upvote 0 Downvote
Only available in 6.1 maintenance release 2 (AKA working issue 10)
 
Upvote 0 Downvote
It works in 6.1 but only if you dial the access code. If you try to program a line pool or speed dial button for that trunk group, you won't get second dial tone. And I am very disappointed in Nortel for that!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question
Incoming calls go to dial tone on Nortel MICS-XC 7.0
Replies
11
Views
1K
curlycord
curlycord
N
  • Locked
  • Question
Need support on dial 9 Nortel MICS PRI When dial 9 display states Invalid number. Incoming DIDS work fine. Been working for years. Provider 1
Replies
6
Views
1K
Nortel dino
N
potrocito
  • Locked
  • Question
MICS 6.1 Incomplete CLID after STIR/SHAKEN 2
Replies
2
Views
335
exsmogger
exsmogger
Don W
  • Locked
  • Question
Mics software upgrade tools
Replies
9
Views
668
curlycord
curlycord
telllman
  • Locked
  • Question
External Paging on Norstar MICS 12 32
Replies
5
Views
538
telllman
telllman

Part and Inventory Search

Sponsor

Back
Top