Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Seagate Backup Exec 1
- Thread starter mohawk23
- Start date
-
1
- #2
histobastifish
MIS
Are you saying that the job has been running for a while and you can't get it to stop?
If so, you can stop the processes by doing this:
Start>Run>
drwtsn32 -p 1952
OK
Start>Run>
drwtsn32 -p 684
OK
Exit (Close) BKUPEXEC
Then Stop and Start all BKUPEXEC Services in Computer Management.
I am assuming you are using W2K of course.
"Scientists have proven that living actually causes death."
If so, you can stop the processes by doing this:
Start>Run>
drwtsn32 -p 1952
OK
Start>Run>
drwtsn32 -p 684
OK
Exit (Close) BKUPEXEC
Then Stop and Start all BKUPEXEC Services in Computer Management.
I am assuming you are using W2K of course.
"Scientists have proven that living actually causes death."
Hello
I had the same sort of problem a while ago and I somehow wound up, in NT 4.0 sp 6, getting it to quit. . .
However, now I get a "bewin32 - Start Catalog Failed: Unknown error 0x1" and the Backup Exec software won't open.
Backup Exec Scheduler has no issue, but bewin32.exe is kaput.
Tried uninstall and reinstall, but no good.
ANY IDEAS.
I had the same sort of problem a while ago and I somehow wound up, in NT 4.0 sp 6, getting it to quit. . .
However, now I get a "bewin32 - Start Catalog Failed: Unknown error 0x1" and the Backup Exec software won't open.
Backup Exec Scheduler has no issue, but bewin32.exe is kaput.
Tried uninstall and reinstall, but no good.
ANY IDEAS.
- Status
Similar threads
- Locked
- Question