SE Licensing Select vs Standard

[vztech]

Maybe someone can enlighten me on select. I'm reading through the Feb 2015 PDF

Select Lic IPO-SL 9.1 SE PLDS LIC select should show up looking like ? under licensing in the IPO.
LDAP integration ( I thought standard could also do this ? )
Will contact center select work on SE standard ?

IP Office Server Edition is now available in a “Select” offer that combines higher scalability,
enhanced resiliency and sophisticated applications, including:
• Premium Server Edition offer, increasing the addressable market with 2500 users, 100%
Unified Communication (UC) across 150 sites
• Extensive resiliency options
• Continued low total cost of ownership and simplicity for mid-market bla bla bla bla

Thanks

It's only dialtone!!!

 

[jhengel]

My understanding is you can create users/extensions and assign a voicemail to email address directly in Active Directory and it will create the user for you in IP Office. LDAP contacts for the directory can sync regardless of select or standard.

Wish Avaya would make this standard for all versions...

 

[tlpeter]

Yes it will work on the normal SE too.
There is a comparison table in the tech bulletin.

BAZINGA!

I'm not insane, my mother had me tested!

 

[vztech]

Wow trying to fing any info on the active directory integration and how far AD will go in brutal.

A comparison of content and features for IP Office R9.1 Select vs. Standard follows (again, for R9.1, Select options are available on the SE platform only):
IP Office R9.1 Select
IP Office R9.1 (Standard)
Scalability
SE capacity - max 2,500 users (up from 2,000)
Yes
N/A
SE capacity on single server - max 2,500 users (up from 1,500)
Yes
N/A
SE nodes - max 150 (up from 32)
Yes
N/A
SE 1,000 UC (up from 750)
Yes
N/A
SE VM Pro scalability to 250 ports (up from 150)
Yes
N/A
SE VM Dual Active to 500 ports
Yes
N/A
SE Hunt Groups - max 500 (up from 300)
Yes
N/A
SE Conference ports – max 512 (up from 256)
Yes
N/A
SE SIP channels per node – max 1024 (up from 512)
Yes
N/A
SE SCN channels per trunk – max 500 (up from 250)
Yes
N/A
SE Soft Consoles – max 50 (up from 32)
Yes
N/A
BHCC – max 20,000 (up from 18,000)
Yes
N/A
Resiliency
Improved SE resiliency
Yes
N/A
SE resiliency to expansion (500V2)
Yes
N/A
SE VMWare HA
Yes
N/A
Remote Worker phone resiliency
Yes
Yes
DECT 4 resiliency
Yes
Yes
Security
TLS/SRTP
Yes
Yes
H.323 encryption
Yes
Yes
Strengthened security / hacking prevention
Yes
Yes
New Capabilities
Yes
Yes
Integration with LDAP and Active Directory
Yes
N/A
Web Collaboration
Yes
Yes
ACCS Integration
Yes
Yes
Conference Scheduling and port reservation
Yes
Yes
Voice Quality Monitoring (Ph 1)
Yes
Yes

It's only dialtone!!!

 

[janni78]

Search for "User Synchronization Using LDAP" in knowledgebase

Seems pretty basic though so some settings you'll still need to do manually

Synchronize User Fields
Navigation: Solution > Solution Settings > User Synchronization Using LDAP > Synchronize User Fields

Use this page to map IP Office user fields to LDAP fields. The following IP Office fields can be mapped.
User Identification

Name
Full Name
Email
Extension

IP Office user fields are described under Call Management > Users > Add Users > User

"Trying is the first step to failure..." - Homer

 

[vztech]

thank you

It's only dialtone!!!