Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCPlus for Tivoli- Installation
- Thread starter it2002
- Start date
winston6071
Programmer
hi jay
in my understanding of scplus, you do not have to use sc server as managed node, cause the scplus adapter is installed on the tmr server, and connects itself to the sc server, and just sends sc specific commands to sc.
if you install it only for tec use you just have to write your rules, if you need something special and reload them. but take care scplus do not work with 3.7.1, and in 3.7 you have to change the '..' in baroc files otherwise it will not work.
i think SC Server needs not to be managed node
i will check it exactly
hope this helps a little in meantime
ciao joe
in my understanding of scplus, you do not have to use sc server as managed node, cause the scplus adapter is installed on the tmr server, and connects itself to the sc server, and just sends sc specific commands to sc.
if you install it only for tec use you just have to write your rules, if you need something special and reload them. but take care scplus do not work with 3.7.1, and in 3.7 you have to change the '..' in baroc files otherwise it will not work.
i think SC Server needs not to be managed node
i will check it exactly
hope this helps a little in meantime
ciao joe
- Status
Similar threads
- Locked
- Question
- Locked
- Question