Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

scn between 8.0 and 9.1

Status
Not open for further replies.

DigitalG

Technical User
Joined
Mar 11, 2005
Messages
435
Location
CA
scn between 8.0 and 9.1 will it work ?
 
Yes
your feature set will be all of the R8.0 but it will work

Joe W.

FHandw, ACSS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
 
I've done 8.0 to 9.1 and it works fine for me, not a "Avaya" supported setup.
 
one major version difference is officially supported (feature set will be lowest version), two major version difference is not. It might work, don't bother reporting troubles (even none SCN related). Trouble will be discarded instantly, you will be told to fix the version difference issue. I suspect that Avaya will actually treat the 8.1 release as a major as well, making it a three release difference.

From the knowledgebase:
Software Level Interoperation

Small Community Networks is supported between systems with the same major software level or one level of difference in major software level. For example between 9.1 and 9.0 (same major level) and between 8.0 and 9.0 (one major level of difference).

This option is intended mainly to allow the phased upgrading of sites within a Small Community Network. It is still recommended that all systems within a network are upgraded to the same level where possible. Within a Small Community Network including differing levels of software, the network features and capacity will be based on the lowest level of software within the network.

GB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top