Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SBC HA 8.1 manual failover

Status
Not open for further replies.

lopes1211

Technical User
Jan 11, 2002
2,843
US
I'm going through the docs on patching SBC 8.1 HA. It says to patch the secondary via CLI, then swap the primary/secondary, then patch the new secondary. Nothing in the docs seems to discuss how to manually swap the primary/secondary. I know I can reboot the primary which will force the secondary to become the new primary but I feel like there should be a more direct way of doing that. Any ideas, or is the reboot the preferred/only method? Thanks!

-CL
 
Yeah, I've never exactly trusted it myself, but restart application or reboot from the EMS makes the two interchange gracefully. I've run pcaps on both and seen the RTP move over. Lab it out to be sure, but that's what I'd do.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top